How should the main shaft of the stone engraving machine be derusted if it rusts?

Stone engraving machine because the carving is stone, so its performance requirements are also very high. This is also because the stone carved by the stone engraving machine, so the main shaft of the stone engraving machine is easy to rust, this time should be timely rust removal. However, many users do not know how to remove rust. Let's talk about how to remove rust from the main shaft. The hardness of the stone is higher, and the requirements for the engraving machine are higher compared to other engraving materials. Therefore, relatively speaking, the performance of stone engraving machine is also very high. Stone engraving machine can be used for stone lettering, stone relief, Stone Yang carving, stone Yin carving, stone line carving, stone cutting, Stone hollowing out, and is suitable for carving and manufacturing tombstone carving, stone carving crafts and other workpieces. With the increasing number of users of CNC Engraving machines, stone engraving machines have also received more attention. Due to the influence of the working environment, the motor spindle of the stone engraving machine will rust. If it is not processed for a long time, it will shorten the life of the spindle motor and affect the use of the stone engraving machine. The following small series will introduce you to the solution to Rust of stone engraving machine spindle. First, physical methods for rust removal: eliminate the appearance rust scale, oxide scale and so on by the method of knocking, shoveling, scraping, brushing, sand or flexible frustration by hand, which is the radical derusting method of painter, you can also use blades, scrapers, pointed hammers, wire brushes, emery cloth, broken saw blades and other tools, which is also the simplest method. Second, chemical derusting: WD-can be used- 40 clean the lubricant and spray it evenly on the motor. When I was about half a child, I could wipe off the rust on the stone engraving machine with cotton cloth. If the rust is severe, I can get it several times more. WD- 40 is non-conductive and has good lubricating effect. The above is to deal with the stone engraving machine rust method, in the ordinary application must pay more attention. Pay more attention to the stone engraving machine.