Enclosed Type

Ningbo CNC engraving machine installation must pay attention to the problem

by：Transon 2020-04-23

Ningbo CNC engraving machine at the time of installation, the following seven questions you must attach: 1, do not install this equipment when lightning or thunder, do not install socket in damp places, do not touch uninsulated power cord. 2, computer operation personnel must go through strict training, must pay attention to the personal safety and the safety of the machine in the process of operation, and strictly in accordance with the procedures to operate CNC engraving machine. 3, power supply voltage 210 v - demand 230 v, if the power supply voltage instability or surrounded by high power electric equipment, please be sure to select regulated power supply in under the guidance of professional and technical personnel. 4, ningbo CNC engraving machine, control cabinet must be ground wire, data cable cannot be charged. 5, do not wear gloves operation staff, it is better to wear protective goggles. 6, for steel structure of longmen manipulator part aviation aluminum castings, relatively soft, when the mounting screw ( Especially when installing engraving machine) Don't be too hard to prevent slippery silk. 7, the cutting tools must be installed and clamping, keep sharp knives, a blunt knife will bring down the carving quality motor overload. Ningbo CNC engraving machine operation notice is introduced here.

Custom message