This can make the engraving speed of the engraving machine faster
When we use a new engraving machine, we can feel its efficient work, but after a period of use, the engraving speed of the engraving machine may not be so fast, this is also relatively normal. At this time, we can take some methods to improve the engraving speed of the engraving machine. The details are as follows: according to the reaction of many customers, some friends bought woodworking engraving machines, which were carved very fast during technical training, but after running for a period of time, due to the inability of operation, some configuration information or settings are lost, resulting in high-speed engraving machines becoming low-speed engraving machines. How can we improve the engraving speed of engraving machines? In terms of software, making the same word and selecting different tools will generate different tool paths, which means there will be a gap in processing time. Therefore, we must choose the tool model when making the path, and select the tool with larger model size on the premise that we can make the path, so that the generated path will be reduced, the actual processing time will be reduced. Another important setting is the software's tool lifting distance setting. The larger this value is, the longer the woodworking engraving machine will run in the process of running. We can try our best to minimize this value according to the flatness of the material. The setting of machine operation parameters, manual low speed and manual high speed affect the running speed of the machine in the manual state, and the empty speed affects the speed of the machine after lifting the knife, the processing speed is not difficult to understand is the running speed of the machine during normal processing. These speeds should be comprehensively considered according to the overall performance of tombstone engraving machine and the hardness of processing materials, and try to set them as the maximum value to improve efficiency, the above are all very good ways to improve the engraving speed of the engraving machine. You don't have to worry about the engraving speed of the engraving machine.