The good process performance of engraving machine

Engraving machine is very common in many industries, and people who have used it also like it. However, in order to let more people know about the engraving machine, Xiaobian has sorted out the process performance of some engraving machines in use. If someone around you is not very clear, you can share it with them. Have you ever understood the importance of carving tools? Let's learn about the first, good process performance; In order to facilitate manufacture, cutting tool materials are required to have good technological performance. Second, economy; Economy is one of the important indexes of cutting tool materials. Although some cutting tool materials are very expensive, due to their long service life, the cost allocated to each part is not necessarily high. Third, the predictability of cutting performance. With the development of machining automation, good predictability is required for cutting performance such as tool wear and tool durability. Fourth, high hardness and wear resistance; Hardness is the basic characteristics of the tool material should have, the tool to cut the material from the workpiece, its hardness must be greater than the hardness of the workpiece material. The hardness of cutting tool materials is generally above 60HRC. Wear resistance is the ability of the material to resist wear, in general, the higher the hardness of the tool material, the better the wear resistance, the finer the grain of the material, the more uniform the distribution, the higher the wear resistance. Fifth, sufficient strength and toughness; In order to make the tool work under great pressure and under the conditions of impact and vibration in the cutting process without causing edge chipping and breaking, tool materials must have sufficient strength and toughness. Sixth, high heat resistance; Refers to the performance of tool materials to maintain hardness, wear resistance, strength and toughness at high temperatures. The higher the high temperature hardness of the tool material, the better the cutting performance of the tool and the higher the allowable cutting speed; In addition to high temperature hardness, the tool material should also have the ability to resist oxidation at high temperature and good resistance to adhesion and diffusion. The engraving machine is also very stable in the process of work, and the quality of the carved workpiece is very good. In short, you can use the engraving machine with confidence.