CNC Plasma Cutting Machine Plasma Cutter Plasma Cut CNC
Enclosed Type
Laser cutting machine vacuum pump diaphragm solution
by：Transon
2020-10-31
Laser cutting diaphragm can provide good quality of trimming, at the same time can reduce the risk of mechanical damage caused by cutting.
for the applications, requirements in made of neoprene and ptfe (1 mm 0. 039). Thick diaphragm mounting holes cut into a center. Hole diameter is 22. 9毫米( 0. 9) 。
the cutting process using the installation on the XY platform a 80 W laser Synrad, equipped with 2. 5 focal length lens cutting head, which can provide 0. 1毫米( 0. 004). The focus of light spot. And use the CDA ( Clean and dry air) As auxiliary gas, through 0. 9毫米( 0. 0345). Width to 100 PSI velocity nozzle, to reduce the harm of lens melting. So that we can to 74 mm/s ( 175英寸/分钟) The cutting speed to finish cutting. After trimming is very smooth, and melt volume is small.
for the applications, requirements in made of neoprene and ptfe (1 mm 0. 039). Thick diaphragm mounting holes cut into a center. Hole diameter is 22. 9毫米( 0. 9) 。
the cutting process using the installation on the XY platform a 80 W laser Synrad, equipped with 2. 5 focal length lens cutting head, which can provide 0. 1毫米( 0. 004). The focus of light spot. And use the CDA ( Clean and dry air) As auxiliary gas, through 0. 9毫米( 0. 0345). Width to 100 PSI velocity nozzle, to reduce the harm of lens melting. So that we can to 74 mm/s ( 175英寸/分钟) The cutting speed to finish cutting. After trimming is very smooth, and melt volume is small.
Custom message
Related Products
