Five-axis bent wood engraving machine right using method

For a first-time five-axis bent wood engraving machine customer, may be nervous about learning five shaft bent wood engraving machine, lest they should not, in fact, five axis bent wood engraving machine training is a gradual process, operation method is very simple, together and see below five axis bent wood engraving machine right using method, let you from the first to know.





1, 5 axis bent wood engraving machine tool handles and jacketed good contact; Jacket to firmly grip the handle, if time is too long jacket used inner hole deformation, clamp must be replaced immediately.


2, select suitable five-axis bent wood engraving machine tool jacket size; Cannot choose section, not enough round, wear, inner hole taper of the cutter holder, otherwise it will cause the handle vibration, sculpture is less than ideal effect.


3, five axis bent wood engraving machine used to make the thickness of the blade can not more than the thickness of the cutting, can appear otherwise cutting knife.


4, often should check the five-axis bent wood engraving machine tool toughness; If you are using is blunt, please immediately change, avoid cutting knife.


5, cutting of different material, should be reasonably adjust the cutting speed. Recommend cutting speed to keep balance, speed consistent as far as possible, in order to achieve better results, cutting too long can't stay, the same to.


are not familiar with five-axis bent wood engraving machine related performance and safety operation technology, or not carried out in accordance with the safety operation procedures for convenience processing operation, is likely to lead to accidents. Don't own maintenance incase of electrical control, a lot of electric equipment with high pressure, must find repair machine manufacturer.