Enclosed Type

Tips to prevent stone carving machine hurt mesa

by：Transon 2020-11-01

many customers buy stone engraving machine, early because of stone carving machine are not familiar with, may encounter a few problems in use, as we say today, stone is rugged, knife under the set parameters, tend to cause cut mesa, how can we solve this problem?
because every stone is homogeneous and the thickness is different, if according to the parameters of the normal equipment, can cause, uneven knife pressure. We can solve this, at the time of the Z axis positioning, not to let the knife material surface, but moved directly touching the mesa material let the knife, to touch slightly, not carved broken mesa, here will be Z axis XianGui zero, then according to the software Settings of cutting depth and improve the corresponding level. Like you in the software to set the cutting depth, so here we accurately an increase of the knife, in this Z axis to zero again, this is the origin of the Z axis.
setting depth according to software, the machine under the Minimum point is the place where my door time zero, is at the top of the mesa that to ensure the material carve without carve to mesa.
I hope this little skills can help people, so many tips also need everyone in the use of the process of trying to find, let the machine to be your friend.

Custom message