Enclosed Type

The matters of attention in the CNC engraving machine in model making

by：Transon 2020-05-01

Processing parameter should be set according to the reasonable to set material processing, and to give full consideration to the differences of different materials. CNC engraving machine spindle speed and tool feed rate according to the material and also have differences, too high or tool spindle speed feed speed cutting knife and material burning too easy to happen, too slow often cause rough surface quality, etc. Cutter knife depth under each generally not more than 3 mm, in order to avoid cutting knife, several times for the thickness of the thicker workpiece can be cut to ensure the quality. Workpiece clamp fixed to reasonable. Pay attention to the measurement and calculation of fixture installation location is on the tool path, in order to avoid a collision. In addition, because the jig is often difficult to fixed plate center, in the finishing machining may be due to the parts connected to the panel is reduced, have not been effective clamping and cutting tools of high speed and cause dangerous artifacts fly out, so in the thickness direction is often set aside a certain machining allowance. In addition, the machining on the origin of the selected to be reasonable. Engraving machine price information in yifan numerical control network.

Custom message