Transon TSW9015 ATC CNC Router wood carving cutting machine woodworking machinery with rotary
The common malfunction parsing engraving machine
by：Transon
2020-05-02
People use the furniture are usually made of sheet, plate, although the surface is smooth, but not beautiful, so the producers on the plank carves three-dimensional pattern to enhance plank of beautiful degree.
People now use the machine for plate engraving is very common, the program to control card, the machine can work in accordance with the procedures alone carved, very convenient.
Engraving machine is used for engraving materials commonly used machine, is a machine that could go wrong, common problems of carving machine has the following kinds: 1.
Spindle and mesa not vertical;
Vertical spindle and mesa not so there will be a problem is the decorative pattern carved and shades, so when not vertical spindle and mesa to correction.
And the reasons for this situation is a problem of cutting tool or the problem of control card, after find out the reason of can be adjusted.
2.
Engraving machine spindle drive abnormal sound.
When this happens, you should consider whether the Z axis drives or Z axis screw has a problem.
Solution is to determine whether the spindle rotation and check frequency converter set.
Spindle stalling or frequency converter set wrong can have abnormal sound.
3.
Engraving machine and mechanical origin back in the opposite direction.
The causes of this phenomenon is probably because the spindle itself is damaged or bearing problems.
Solution is to modify the frequency converter connection direction or adjust the direction of motor.
4.
Engraving machine can't normal back to the origin.
When this happens, you should consider control card failure, limit switch failure, the failure of the drive and motor, then one by one.
Custom message
Do not allow empty
Do not allow emptyPlease enter a valid e-mail format
Do not allow empty
Related Products
