The advantages of laser cutting machine compared with other cutting equipment

The advantages of laser cutting machine compared with other cutting equipment; 1, good cutting quality. Notch width narrow ( As a general rule, be 0. 1 - - 0. 5毫米) , high precision, General hole center distance error is 0. 1 - - 0. 4 mm, the size of the contour error is 0. 1 - - 0. 5毫米) Good, the surface roughness of incision ( Ra is 12. 5 - - 25μm) , generally do not need to processing kerf width can be welded. 2, cutting speed is fast. With 2 kw laser power, for example, 8 mm thick carbon steel cutting speed is 1. 6m/min; 2 mm thick stainless steel cutting speed is 3. 5 m/min, small heat affected zone, deformation. 3, clean, safe, no pollution. Greatly improve the work environment of operators. Of course in terms of accuracy and surface roughness of incision, CO2 laser cutting can not be more than electric processing; In terms of cutting thickness to meet the fire and the level of plasma cutting. But more than enough to prove that the advantages of significantly: CO2 laser cutting part has been and is replacing the traditional cutting process, especially the cutting of various kinds of nonmetal materials. It is developing rapidly, increasingly widely used an advanced processing method. 4, non-contact cutting. Laser cutting torch and workpiece out of contact, there is no tool wear. Different shapes of parts processing, do not need to change 'tool', only need to change the output of the laser parameters. Laser cutting process, low noise, small vibration, no pollution. 5, the variety of cutting materials. Compared with oxyacetylene cutting and plasma cutting, laser cutting the kinds of materials, including metal, nonmetal, metal and nonmetal based composite material, leather, wood, fiber, etc. But for different materials, due to its thermal physical properties and the absorption rate of laser is different, show different laser cutting adaptability.