Portable Laser Welding Machine For Lithium Battery Raycus 1500W Spot Laser Welder
Enclosed Type
Laser cutting machine maintenance and cleaning techniques
by：Transon
2020-10-31
Laser cutting is a laser beam to the surface to the energy released when the workpiece melting and evaporation, to achieve the purpose of cutting and carving, has high precision, fast cutting, cutting pattern is not limited to restrictions, automatic typesetting save materials, incision smooth, low processing cost etc, will gradually improve or replace the traditional cutting process equipment.
But in daily work, also want to maintain good laser cutting machine, to make it play a better performance advantage.
replacement with water tank water clean advice: clean water tank and replace circulating water every week note: machine work before must ensure that the laser tube is full of circulating water. Laser cutting machine of the circulating water quality and water temperature directly affects the service life of laser tube, it is recommended to use pure water, and to control the water temperature below 35 ℃. For more than 35 ℃ to replace the circulating water, or to add ice to reduce the water temperature, water, Advice the user to select the cooling machine, or use two tank) 。 Clean water tank: first, turn the power off and remove water inlet pipe, let the laser tube of water into the tank automatically, open the water tank, pump and clear the dirt on the water pump. Good clean water tank clean, replace the circulating water, the water pump to restore back into the water tank, the connection pipe inserted into the inlet of the pump, tidy up the joint. 2 - the pump power alone, and running 3 minutes ( The laser tube is full of circulating water) 。
replacement with water tank water clean advice: clean water tank and replace circulating water every week note: machine work before must ensure that the laser tube is full of circulating water. Laser cutting machine of the circulating water quality and water temperature directly affects the service life of laser tube, it is recommended to use pure water, and to control the water temperature below 35 ℃. For more than 35 ℃ to replace the circulating water, or to add ice to reduce the water temperature, water, Advice the user to select the cooling machine, or use two tank) 。 Clean water tank: first, turn the power off and remove water inlet pipe, let the laser tube of water into the tank automatically, open the water tank, pump and clear the dirt on the water pump. Good clean water tank clean, replace the circulating water, the water pump to restore back into the water tank, the connection pipe inserted into the inlet of the pump, tidy up the joint. 2 - the pump power alone, and running 3 minutes ( The laser tube is full of circulating water) 。
Custom message
Related Products
