Flexible manufacturing of laser cutting machine

Laser cutting machine laser beam with direct and guide the two methods, the laser can make rotation, tilt, up and down or so, such as sports, vertical plane and other complex workpiece can be processed workpiece surface; And direct drive not idle and high precision. Flip the beam axis machines to move or way of parts, machining some using traditional methods are difficult parts. Laser head up and down or so freedom of movement, the workpiece during machining can be fixed, still can realize the machining of complex, and as long as the use of mobile rotary worktable, can be processed parts than axis stroke. The laser beam is controlled by automatic focusing. Laser system straight axis along the optical axis or arbitrary axial positioning, to keep the beam focus; Focus position any time accurately, and unlimited schedule. Flexible cutting obvious advantages of optical fiber laser cutting machine is mainly in the following aspects: the laser itself is a relatively simple and easy to control the device, if it produces beam gathered into extremely thin beam, can be cut; Defocused point can welding; Again a little bit defocusing, can heat treatment. Laser beam using direct drive and the guidance method. Laser can make rotation, tilt, from top to bottom and move around, such as sports, machining of complex surface and vertical; And direct drive not idle, high precision. Combining the laser control and robot, use robots to mobile or more parts under way to flip the beam axis way, machinable some difficult parts processed with traditional methods. Laser can freedom of movement, the laser has reached five axes, even the workpiece when machining remain fixed, still can realize the machining of complex, and as long as the use of mobile rotary worktable, can be processed parts than axis stroke. The laser beam is controlled by automatic focusing. Laser system straight axis along the optical axis or arbitrary axial positioning, to keep the beam focus; Focus position any time accurately, and unlimited schedule. Using laser processing, processing speed, not only high efficiency, low cost, but also avoid the mold or tool change, shorten the production preparation time period. Easy to implement continuous process, a laser beam displacement time short, improved the production efficiency. For a variety of artifacts, alternately. A workpiece processing, can unload the completed parts, and install for machining, realize the parallel processing, reduce the installation time, increase the laser processing time. Multistage rapid response of collision avoidance measures, beams of light guide contact artifacts, immediately stop the movement system, the system was not damaged, to avoid expensive maintenance; After the collision can recover quickly and simply, reduce downtime, caused the collision improves the machining efficiency and reliability of the laser system.