Enclosed Type

The analysis of the laser cutting machine light problem

by：Transon 2020-10-29

Laser cutting machine light problem analysis: 1, caused by power supply voltage is not stable. You can configure a voltage stabilizer to stabilize voltage. 2, by the lens is too dirty or damaged, the light path caused serious deviation. At this moment need to clean or replace the lens to adjust the light path. 3, caused by the water cycle is not normal. At this moment need clean water pumps and pipes, if necessary, replace the water pump. 4, caused by water conservation is not normal. The water conservation needs to be replaced. 5, caused by laser tube aging. Need to replace the laser tube. 6, is caused by laser power supply or the motherboard failure, need to replace the corresponding parts.

Custom message