Enclosed Type

Poor quality of laser cutting machine cutting tests

by：Transon 2020-10-27

Laser cutting machine for cutting the poor quality inspection: 1, cutting height, ( Suggested that actual cutting height at 0. 8 to 1. Between the 2 mm) , such as the actual cutting height is not allowed, you may need to calibrate; 2, cutting nozzle, nozzle type and examine whether the size with wrong, if it is right to check whether there is damage to the nozzle, roundness is normal; 3, light heart, it is suggested that with a diameter of 1. 0 of the cutting nozzle the optical center inspection, check that the light focus - good heart Between 1 ~ 1. This play out spot small easy to observe; 4, protective glasses, check whether protect the lens is clean, for without water without oil residue. Sometimes because the weather or shop help gas too cold causes such as lens fogging protection; 5, focus, check whether the focus is set correctly. If it is automatic focus cutting head must use the phone APP to check focus is correct; 6, modify, cutting parameters, check them and there is no problem after more than five, and then based on the change of phenomenon specific parameters.

Custom message