Enclosed Type

Laser cutting machine determine focus position in the industrial production methods

by：Transon 2020-10-27

Laser cutting machine in industrial production and a simple method to determine the focus position have five: ( 1) Blue spark method: remove the nozzle, blowing air, will play on stainless steel plate, the pulse laser makes the cutting head from the top down movement, until the blue sparks as the focus. So we can calculate the focal point, after cutting process according to different plate thickness different corresponding focusing. ( 2) Inclined plate method: use and a vertical axis Angle of inclined put plastic board makes its level, looking for a laser beam as the focus of the small. ( 3) Printing method: make the cutting head from the top down movement, laser print on the plastic sheet, print small diameter as the focus. ( 4) Parallel light pipe. This is a commonly used method, that is, at the output of the CO2 laser beam expander of parallel light pipe processing, expanded beam after the beam diameter, divergence Angle smaller, so in cutting work within the scope of the proximal and distal focused beam size close to agreement before. ( 5) Increase in the cutting head under a separate mobile lens axis, it and control the nozzle to the material surface distance ( 站) The Z axis is part two independent of each other. When the machine table to move or optical axis direction, the beam from the proximal to distal F axis move at the same time, also make the light beam focusing spot diameter after consistent throughout the processing area

Custom message