Three factors affecting the cutting quality of the metal laser cutting machine

On the application of metal laser cutting machine, cutting quality is the first condition of the businesses have to consider, good cutting quality to make metal laser cutting machine to create value for themselves, so the factors affecting the cutting quality is the need to master, the following analysis some reasons affecting the quality of cutting. First, machining material thickness of the material thickness is directly influence the cutting quality of the metal laser cutting machine, laser cutting of general in cutting metal materials, has a defined parameters, under 12 mm stainless steel or carbon steel, laser cutting technology is adopted to improve the processing, the effect of cutting quality can reach the forecast, if out of range, the effect will be discounted, thickening of every 1 mm, material cutting mouth can increase the roughness of 0. 5mm。
the second, the type of auxiliary gas in metal laser cutting machine processing metal materials, auxiliary gas processing, general can be divided into oxygen and nitrogen. The effects of oxygen and nitrogen is different, if the cutting material is not high to the requirement of processing results, the required number, you can use the oxygen as auxiliary, because it can improve the cutting speed. If the requirements of the corresponding results are of good quality, you need to use nitrogen gas as auxiliary.
3, cutting speed, cutting speed influence the cutting quality is obvious, because too fast cutting, the cutting speed quickly, without proper cutting, the cutting material inosculation of unfinished, makes the cutting effect is not up to standard, and if too slow, project has been finished, laser cutting machine and laser output, because it is melted, so will cause kerf width has been increased, wastes the cost, so can't cutting speed is too slow, suitable for the key.