Mopa JPT new design fiber laser marking machine 20w 30w laser marker for Stainless Steel Aluminum
Enclosed Type
The influence of laser cutting machine power
by：Transon
2020-10-28
Laser cutting machine power is one of the important factors that affect the cutting quality.
The laser power, the greater the cutting plate thickness is thick.
In the same thickness, the cutting of stainless steel and aluminum and other non-ferrous metal laser power for cutting carbon steel than is much larger.
But with the increase of laser power, cutting seam width and heat affected zone will increase.
With the increase of laser power, cutting speed and cutting thickness are increased.
If the low carbon steel plate thickness increases, the larger the diameter of the nozzle should be adopted and low oxygen pressure, to prevent burn cut edge.
Aluminum has a strong laser reflection effect and high thermal conductivity, than low carbon steel and stainless steel cutting.
Compared with the cutting low carbon steel, under the same laser power, cutting aluminum alloy cutting speed and cutting thickness are low.
Custom message
Do not allow empty
Do not allow emptyPlease enter a valid e-mail format
Do not allow empty
Related Products
