Related matters needing attention when using CNC engraving machine

In their daily use of CNC engraving machine, please you must pay attention to the following matters: 1, CNC engraving machine at the end of the work, in order to prevent the wire rod prolapse affect the concentricity and precision of the machine, so you have to put TuoZai stopped at the middle position. 2, work in the normal operation of CNC engraving machine, to prevent debris fell into the water blocking the main shaft, so it shall be put a bucket full of water pump cap tightly. 3, CNC engraving machine should often regularly clean the dust inside the cutter holder, to avoid the influence the normal function of the equipment operation. 4, when the CNC engraving machine water-cooled motor work, must ensure that the pipe fixation. 5, before starting CNC engraving machine equipment, should start the spindle motor, make sure no inversion phenomenon may continue to use. Around 6, CNC engraving machine can not pile up sundry, foreign body, must be kept clean. 7, CNC engraving machine can work continuously for 24 hours, so it is forbidden to run for a long time, so as to avoid affecting the precision of the equipment carving. 8, it is forbidden to use corrosive liquid to clean CNC engraving machine parts and keyboard. 9, CNC engraving machine is strictly prohibited in all types of connectors connectors and other components of charged pull plug, otherwise it will cause serious consequences.