JPT Pulse Air Cooling Laser Cleaning Machine 100w/200w/300w/500w Fiber Laser for Steel Surface Rust Removal for Steel Rust
Enclosed Type
Laser engraving, sculpture when need to pay attention to
by：Transon
2021-01-08
Laser engraving, sculpture need to pay attention to what the
light like birch lumber, cherry wood or maple is easy to laser gasification, which is suitable for sculpture. Each wood panels production has its own characteristics, some dense some, such as hardwood, while carving or cutting with laser power. We recommend not familiar carving wood, carved features to study first.
plywood:
in fact and on the wood engraving on the plywood not big difference, is only one thing to note, the engraving depth is too deep. After cutting edge will be as black as wood plywood, key if the plywood is used that made of wood. Wood carving in general, on the wood carving is usually Yin carving, engraving depth is deeper. Such power generally set high, if encounter a hard wood may make after carving graphics color becomes darker.
if you want to make the color shallow some, can increase the speed of engraving, tried to carve a few times more.
some wood carving will produce some lampblack is attached to the surface of wood, if the wood has brush paint can it carefully wipe wet cloth, if you do not go up lacquer might not clean, cause product surface soiled.
wood cutting:
the depth of the laser engraving machine cutting wood is generally not deep, maximum cutting depth depends on wooden materials and laser power, if you want to cut thick lumber, can cut a little slower, but may cause burning of wood. Specific operations can try to use large size lenses, and adopt the method of repeated cutting.
in this paper, by the laser engraving, this view does not represent the views
light like birch lumber, cherry wood or maple is easy to laser gasification, which is suitable for sculpture. Each wood panels production has its own characteristics, some dense some, such as hardwood, while carving or cutting with laser power. We recommend not familiar carving wood, carved features to study first.
plywood:
in fact and on the wood engraving on the plywood not big difference, is only one thing to note, the engraving depth is too deep. After cutting edge will be as black as wood plywood, key if the plywood is used that made of wood. Wood carving in general, on the wood carving is usually Yin carving, engraving depth is deeper. Such power generally set high, if encounter a hard wood may make after carving graphics color becomes darker.
if you want to make the color shallow some, can increase the speed of engraving, tried to carve a few times more.
some wood carving will produce some lampblack is attached to the surface of wood, if the wood has brush paint can it carefully wipe wet cloth, if you do not go up lacquer might not clean, cause product surface soiled.
wood cutting:
the depth of the laser engraving machine cutting wood is generally not deep, maximum cutting depth depends on wooden materials and laser power, if you want to cut thick lumber, can cut a little slower, but may cause burning of wood. Specific operations can try to use large size lenses, and adopt the method of repeated cutting.
in this paper, by the laser engraving, this view does not represent the views
Custom message
Related Products
