Laser engraving machine reason and solution - empty - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

laser engraving machine carved empty why





1, the optical path deviation


2, laser power supply damage


3, about the damage to the circuit or circuit


4, laser tube is damaged or aging


5, ammeter damage





laser engraving machine carved empty common solution





1, the reference manual, adjust the light path


2, replace the laser power supply


3, replace the circuit or circuit


4, replace the laser tube


5, change the ammeter





current meter is damaged, current lose control


good wearing safety protection equipment, trying to identify current meter is damaged, please immediately without electricity, if damage replace current meter.





circuit or circuit damage, caused power off or short circuit


if the device sends out burnt smell, timely replace the new panel and power lines.





laser tube aging or damaged, can't work normally


service life of laser tube has certain, please change in time after the deadline.





the laser light path deviation, cannot work instructions specify the location, cause the empty time


in strict accordance with the manual adjust the laser light path.





laser power supply is damaged, causing the laser will not work


to replace the appropriate power supply, ensure the normal work.





you can see from this, laser engraving machine carved empty the reason mainly is the preventive maintenance and does not reach the designated position, at ordinary times according to become engraving equipment aging, some parts of the damage caused by. So, as a laser engraving factory again, laser engraving machine daily maintenance and maintenance work is critical.


laser engraving machine how to properly maintain



1, in actual use in normal use according to operation specification requirements.


2, daily maintenance requirements after completion of work every day to work surfaces and equipment cleaning refueling so as not to cause unnecessary losses.


3, regular maintenance requirements for once a month, maintain the purpose is to check whether the machine parts screw is loose, ensure the machine lubrication condition and environment condition is good.


4，. Check the connection spindle motor and pump pipe, connected to the pump power, check whether the water pump water supply and drainage works normally.


5, in order to avoid loose of power socket or poor contact processing abnormal make products to be scrapped, please choose the good power socket, should have reliable grounding protection.