Transon TN6090 30W RF Tube Cutting Ability
Enclosed Type
Laser engraving machine laser common problem analysis
by：Transon
2021-01-08
Know should know about the laser engraving machine laser engraving machine is the most important part of the laser laser engraving machine, laser performance directly determines the quality of the carving machine.
Therefore, proper use and maintenance of laser engraving machine, laser is very important.
Here, will be briefly introduced in the laser engraving machine.
the first point: if the laser engraving machine panel test key is not current, we need to check whether the power of the laser engraving machine is open, the high voltage line is loose or fall off, and whether there is a signal line is very loose. If this is the actual current, we need to check whether the laser lens is damaged, or laser tube lens export is contaminated, and whether the light path deviation.
the second point: check the engraving machine of the water cycle system is normal. If the water flow, check that the inlet and outlet is connected or pipes are broken. If there is no water, please check the pump power supply or damage.
the third point: sample points may shine, but in the case of engraving machine does not shine, we need to check the laser engraving machine control panel in detail, so that the optical coupling connection of power supply.
the first point: if the laser engraving machine panel test key is not current, we need to check whether the power of the laser engraving machine is open, the high voltage line is loose or fall off, and whether there is a signal line is very loose. If this is the actual current, we need to check whether the laser lens is damaged, or laser tube lens export is contaminated, and whether the light path deviation.
the second point: check the engraving machine of the water cycle system is normal. If the water flow, check that the inlet and outlet is connected or pipes are broken. If there is no water, please check the pump power supply or damage.
the third point: sample points may shine, but in the case of engraving machine does not shine, we need to check the laser engraving machine control panel in detail, so that the optical coupling connection of power supply.
Custom message
Related Products
