4060 Mini CNC Router For Aluminum PVC PCB, Small Wood CNC Router 4 axis cnc router
Enclosed Type
Laser engraving machine is simple operation points for attention
by：Transon
2021-01-08
(
1)
When measured using autofocus, please pay attention to article must tighten the autofocus, otherwise face will be pushed to the laser head and off course.
( 2) Laser engraving machine is working, forbid to open the lid, The top and front cover) , otherwise it will stop the laser emission, affects the processing quality.
( 3) When machining, must open the exhaust smoke and blowing equipment, to prevent dust pollution focusing lens and reflective lens. Otherwise, the lens will be focusing and reflection, which will indirectly influence strength and machining precision.
( 4) In the processing of wood, paper, artifacts, must pay close attention to the machining speed and strength, in order to avoid the fire too fast and high strength. Can be damaged by flame focusing lens, the light will affect the machining accuracy, processing and intensity, no heavy machinery will be used.
( 5) For initial user processing irregular bus exterior sign: used to show the image of propaganda school on the school bus and sign of the culture. Artifacts, must first to red light positioning, to determine whether the processing location accurate, otherwise easy to create waste.
( 6) Thin wood processing, when the deformation of the material such as cardboard, should adjust deformation amplitude, make the level error is less than 1 mm, in order to avoid excessive focal length is poor, affect the machining accuracy. When dealing with paper, please fixed paper to avoid the shift during the work. Paper cutting, especially soft paper ( Rice paper, base paper) 15, can stack 20 and soaked with water, and then cut. This can improve the work efficiency, at the same time to avoid the risk of burning materials.
( 7) Cutting, artifacts should be placed in the working face the position of 2 cm or more, in order to avoid damage to laser reflection on the back of the workpiece, resulting in waste.
( 8) Clean mirrors and focusing mirror: two fingers grip the mirrors, using only one hand to the camera lens cleaning paper cleaning fluid, gently drag the lens surface, it is prohibited to use finger press the mirror so as not to scratch; Or use cotton swabs to wipe gently with the photographic lens cleaning fluid focus lens, until it clean. ( 9) Carving vector file, the resolution should be high, 500 dpi or 600 dpi) ; Engraving file, the resolution should be more low, 500 dpi mode or roughly 300 dpi) 。 This carving effect will be very good.
( 2) Laser engraving machine is working, forbid to open the lid, The top and front cover) , otherwise it will stop the laser emission, affects the processing quality.
( 3) When machining, must open the exhaust smoke and blowing equipment, to prevent dust pollution focusing lens and reflective lens. Otherwise, the lens will be focusing and reflection, which will indirectly influence strength and machining precision.
( 4) In the processing of wood, paper, artifacts, must pay close attention to the machining speed and strength, in order to avoid the fire too fast and high strength. Can be damaged by flame focusing lens, the light will affect the machining accuracy, processing and intensity, no heavy machinery will be used.
( 5) For initial user processing irregular bus exterior sign: used to show the image of propaganda school on the school bus and sign of the culture. Artifacts, must first to red light positioning, to determine whether the processing location accurate, otherwise easy to create waste.
( 6) Thin wood processing, when the deformation of the material such as cardboard, should adjust deformation amplitude, make the level error is less than 1 mm, in order to avoid excessive focal length is poor, affect the machining accuracy. When dealing with paper, please fixed paper to avoid the shift during the work. Paper cutting, especially soft paper ( Rice paper, base paper) 15, can stack 20 and soaked with water, and then cut. This can improve the work efficiency, at the same time to avoid the risk of burning materials.
( 7) Cutting, artifacts should be placed in the working face the position of 2 cm or more, in order to avoid damage to laser reflection on the back of the workpiece, resulting in waste.
( 8) Clean mirrors and focusing mirror: two fingers grip the mirrors, using only one hand to the camera lens cleaning paper cleaning fluid, gently drag the lens surface, it is prohibited to use finger press the mirror so as not to scratch; Or use cotton swabs to wipe gently with the photographic lens cleaning fluid focus lens, until it clean. ( 9) Carving vector file, the resolution should be high, 500 dpi or 600 dpi) ; Engraving file, the resolution should be more low, 500 dpi mode or roughly 300 dpi) 。 This carving effect will be very good.
Custom message
Related Products
