loading
Enclosed Type

Laser engraving function can not be carved metal cause analysis

by:Transon     2020-04-26
Takeaway: laser engraving machine is generally used in wood, organic glass, glass, stone, crystal, corian, paper, double color boards, alumina, leather, resin and so on. But laser engraving machines, engraving metal problems, cause analysis is as follows: laser engraving machine is generally used in wood, organic glass, glass, stone, crystal, corian, paper, double color boards, alumina, leather, resin and so on. But laser engraving machines, engraving metal problems, cause analysis is as follows: 1, the lattice lattice carved sculpture resembles a high-resolution lattice printing. Laser head swinging, each carved out a line composed of a series of points, and then the laser carving out more line to move up and down at the same time, the last constitute a full-page image or text. Scanning of graphics, text and graphic can use lattice vector quantization. 2, vector cutting and lattice carved, vector cutting is the outer contour line in the graphic. We usually use this mode in the wood, ark, penetration on materials such as paper cutting, can also be used in a variety of material surface for marking operation. 3, carving speed: the speed of the movement refers to the laser engraving speed, usually with IPS ( Inches per second) Said the high speed with high production efficiency. Speed is also used to control the depth of cut, for a specific laser intensity, the slower speed, cutting or engraving depth is greater. You can use engraving machine panel to adjust speed, also can use computer print driver to adjust. In the range of 1% to 100%, the adjustment range is 1%. Hummer machine advanced motion control system can make you in high speed engraving, still get quality of ultra fine carving, carving strength: carving strength refers to come in on the strength of the material surface laser. For a particular sculpture speed, strength, the greater the cutting or engraving depth is greater. You can use engraving machine panel to adjust intensity, also can use computer print driver to adjust. In the range of 1% to 100%, the adjustment range is 1%. The greater the intensity, the greater the equivalent velocity also. Cutting depth is 5, the deeper the light spot size: laser beam spot size can use different focal length of lens. The sculpture of light lens used in high resolution. Large spot lens used for low resolution carving, but for vector cutting, it is the best choice. Standard configuration is 2 new equipment. 0 inches of the lens. The spot size in the middle, is suitable for various occasions. Generally adopts CO2 laser laser engraving machine, and now with the power of laser tube which belong to small and medium-sized power range. Maximum is 300 w. Original metal absorption wavelength laser in this little. So the laser engraving machine carved metal is generally don't have to.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
88888888888888888888888