Enclosed Type

Laser cutting machine to make the normal operation of maintenance and maintenance

by：Transon 2020-10-27

Laser cutting machine in the manufacturing industry has brought a lot of convenience for us at the same time, we also should pay attention to preventive maintenance and laser equipment make its normal work, after all, the price of the laser equipment are not cheap, the normal running of a laser device can bring many benefits to the manufacturer. 一个。 Worktable debris to clean up, for lenses and guide rail cleaning every day. Cleaning the lens must use high concentration alcohol, use a small amount of absorbent cotton dab gently wipe the lens, after the dry with dry cotton. Guide in addition to wipe after processing broken material, also need to add a little oil and motion guide rail lubricating oil is evenly distributed. b。 Method is to regularly open the fan shell, clean smoke exhauster and tube, with high pressure air gun to blow clean before you use wood sweep off the dust off the fan. c。 Radiator fin also want regular cleaning, the method is to use hair brush away the dust on the radiator, and then to deal with water inlet with high pressure air gun, clean with cleaning fluid after heat sink, rinse and dry. d。 Every month regularly for equipment is the a lubricating oil, to do a good job of antirust lubrication. e. When there is cloudy or circulating water circulating water less than a third of the water tanks, is about to change water or water.

Custom message