TS1610 Dual Heads CO2 Laser Cutter Machine Auto Feeding Fabric Laser Cutting Machine
Enclosed Type
Laser cutting machine laser tube in the flare of scattered, do not focus, tube, heat elimination method
by：Transon
2020-10-28
Laser cutting machine laser tube in the flare of scattered, do not focus, tube, heat elimination method: 1.
Check whether there is a stain on lens have dust.
Must be regularly clean the lens, ensure the neatness of lenses prolonged fully;
Choose the focus lens, ensure good light beam.
2.
To test whether the laser tube water temperature higher than the temperature of check and ratify, the normal water temperature must stay under 30 degrees.
3.
Check whether the laser tube support position is reasonable, timely adjust bracket position.
Keep the pipe deformation inside.
4.
Whether the light path is accurate, to ensure the light path without deviation.
Such as below-standard focusing effect, will directly cause the focuser fever.
5.
Also could be the lens selection, focusing on, without considering processing depth, caused the focus effect is poor.
So we also remember to consider when focusing processing depth.
Custom message
Related Products
