TSW1212-8 Multi Head 8 Spindle Rotary router Engraving Machine Cnc Wood router
Enclosed Type
Laser cutting machine according to the thickness of the cutting material select nozzle aperture size
by：Transon
2020-10-28
Laser cutting machine can be quickly auxiliary gas nozzle, which can effectively prevent melt stains and other sundry bounce up, which can protect the focusing lens.
At the same time it can control the gas diffusion area and size, which will affect the cutting quality of laser cutting machine.
At the same time the nozzle aperture size varies according to the thickness of the cutting material.
A, cutting thin plate (
Below 3 mm) , choose Φ 1 mm diameter of the nozzle will be fine, and choose Φ 1. 5 mm diameter of the nozzle will be rough, and corner of the place will be more easy to somewhere to stains.
2, cut thick plate ( More than 3 mm) , choose Φ 1 mm diameter of the nozzle is not so stable when using. When the cutting power is higher, the relative heat for a long time, raises its relative cutting time, use Φ 1 mm diameter of the nozzle gas diffusion area is small, so not too stable, but basically still can use. Choose Φ 1. 5 mm diameter of nozzle gas diffusion area is large, the gas flow velocity is slow, so the cutting is stable.
3, cutting more than 10 mm plate, the current general choice diameter 2 mm or more than 2 mm diameter of nozzle.
but as a result of the nozzle aperture, the greater the protection for focusing mirror is smaller. So the choice of reasonable laser cutting machine, the size of the nozzle aperture can be more effectively.
Below 3 mm) , choose Φ 1 mm diameter of the nozzle will be fine, and choose Φ 1. 5 mm diameter of the nozzle will be rough, and corner of the place will be more easy to somewhere to stains.
2, cut thick plate ( More than 3 mm) , choose Φ 1 mm diameter of the nozzle is not so stable when using. When the cutting power is higher, the relative heat for a long time, raises its relative cutting time, use Φ 1 mm diameter of the nozzle gas diffusion area is small, so not too stable, but basically still can use. Choose Φ 1. 5 mm diameter of nozzle gas diffusion area is large, the gas flow velocity is slow, so the cutting is stable.
3, cutting more than 10 mm plate, the current general choice diameter 2 mm or more than 2 mm diameter of nozzle.
but as a result of the nozzle aperture, the greater the protection for focusing mirror is smaller. So the choice of reasonable laser cutting machine, the size of the nozzle aperture can be more effectively.
Custom message
Related Products
