How to increase the speed of the sculpture of carving machine

the paper simply introduces how the engraving machine for engraving.
one, before we start to work, we should carefully check text spelling in the sculpture project. If possible, print it out and confirm with the customer.
2, protect the computer engraving machine carved in the process of carving, carved objects often dislocation, we also often plagued by to tell the customer their items damaged in the process of carving.
3, in order to avoid these problems, we can try the following
. Check whether carving chooses forceps or head in the wrong? At the same time, computer engraving machine pliers or card head wear conditions will lead to be carved dislocation. Pliers or head if too tight, at the instant of the contact of the cutting tools were carved pop-up can also lead to be carved.
。 For those irregular shape carved, seems to have been fixed on the surface is very tight, also before and after shaking when under pressure. At this time, you can try some waste in order to increase the friction pad under the object. The other is to keep the packing of the goods shipped, although carpentry computer engraving machine is irregular shape of the object, but with its own packing may be very rules, and easy to be fixed, plus a small belt, irregular shape of the object is easy to be fixed. Or trial tool fixed rules, instead of the irregular parts.
。 Sought by the carved under pressure if is large, consider whether you need to use the knife nose cone, if engraving machines diamond segment in the process of carving move when the pressure is too large, the pressure of the tool flank can cause by the movement of the carved work. If you use the incorrect diamond knife, can also lead to the same question. A diamond or degrees DaoHui in-depth materials carvings, and makes the material movement in the process of carved.
。 Engraving machine often equipped with multi-function pliers or head, they are also the iron, so easy to be damage or carved make its slide in the process of carving, then choose some rubber cap or rubber tube was used for fixed carved would help.
。 For plastic carving patterns, can be reposted tape on the back of carved material, and then will with a spray adhesive tape on one side of the spray liquid, after will be posted in a seemingly obsolete computer engraving machine, so that we can avoid to use double-sided adhesive, and difficult to clean surface. Because a quote tape stripping and cleaning easily. Use special carved tape, the tape on one side than the other side of the strong viscosity, thus chart can move or replacement.
the use of engraving machine also has a lot of tricks, as long as the careful operation, believe that mechanical engraving machine is a kind of very convenient.