How to choose the laser cutting machine in choosing a machine should pay attention to what

Laser cutting machine such a device in the whole process of choice is to follow some selection criteria, once we choose this kind of equipment, be sure to confirm our final production scope, and according to the materials or the thickness of cutting for effective choice, only in this way can determine the number of purchasing equipment or related machine type, related to a good groundwork for subsequent procurement, how to choose the laser cutting machine, in this respect will have more selection criteria.



　　1> Cut fine



when the choose and buy laser cutting machine, also must have a look at their cutting precision, basically can control at 0. 1 mm to 0. Between the 2 mm.



　　2> Cut surface smoothness



in laser cutting machine for cutting, the cutting surface smoothness is also very important, first of all to see they have burr, cutting surface is generally more or less have some burrs, laser cutting machine is essentially determined by the thickness of the cutting with the use of gas, 3 mm below is no burr, gas is nitrogen effect is best, the effect of oxygen times, if it is in the air, so that the effect is the worst. Optical fiber laser cutting machine of burr is relatively small, even no burr cutting surface is very smooth.



　　3> See material deformation



if use laser cutting machine for cutting, good equipment material deformation effect is very small.



　　4> The power size



the majority of manufacturers for laser cutting machine and other equipment has its own some power requirements, from the point of some of the existing situation, most factories are under 6 mm sheet metal cutting, there is no need to buy a high-power cutting machine.