How to avoid interference with stepping motor and driver of woodworking engraving machine?

The efficient processing performance of woodworking engraving machine has brought more profits to many customers. Many customers have seen the use effect of their peers and have also understood and purchased equipment, but facing the mixed market, they have also brought some difficulties to customers in purchasing equipment, A little carelessness will buy a piece of equipment that is useless because of the attraction of low prices, which not only brings economic losses to customers, but also delays production. Woodworking engraving machine, as a high-tech automatic mechanical equipment, has been applied to various industries and fields, bringing greater profits to customers. However, as mechanical equipment that runs all the year round, there will definitely be certain consumables and spare parts loss, such as spindle motor, cutting tool, slider, etc. , which are the main consumables of woodworking engraving machine. Therefore, as a user of woodworking engraving machine, it is very important to better understand and master the replacement and maintenance methods of these consumables. Today we will introduce the problems and solutions of the spindle motor of woodworking engraving machine. Failure phenomenon: the spindle motor of woodworking engraving machine suddenly stops, and the frequency converter shows ERR01; Sometimes the motor is energized with a buzzing sound, but does not turn. Solution: 1. The three-wire cable connector from the spindle motor to the inverter is separated. Solution: re-insert or reconnect and try again. 2. Open welding of lead wire in spindle motor of woodworking engraving machine. Confirmation method: multimeter measures the resistance between three cores of spindle motor socket. Solution: remove the socket and re-weld the open welding line. 3. Three-wire cable from spindle motor to Inverter is broken. Confirmation method: the multimeter measures the resistance between the plugs at both ends of the cable. Solution: connect the broken line or change the line. The above three steps are the main methods to solve the problem of spindle motor failure of woodworking engraving machine. When customers encounter the problem of spindle stop, they can eliminate and solve it one by one according to the fault phenomenon.