High speed engraving and milling machine needs to maintain on a regular basis
All machinery products regularly to maintain, high speed engraving and milling machine, too. High speed engraving and milling machine is a kind of high efficiency and high precision nc machine tools, so need more users for daily maintenance and maintenance. Rather the daily maintenance and maintenance of high-speed carving and milling machine is very important to the service life of the machine and precision. So we should from what respect? First, ensure high speed engraving and milling machine work 10 hours a day, this is in order to guarantee the normal work of the cooling water clean and the water pump, the spindle motor must not water shortage phenomenon. Use even timing change in cooling water, prevent the water temperature is too high to affect their work. Winter working environment, of course, if too low, we can replace the water inside cistern with antifreeze. To maintain the cleanness of high-speed engraving and milling machine, should pay attention to clean up after each use, be sure to clean up the dust on the platform and the transmission system. On a regular basis to the X, Y, Z drive system lubricating, maintenance with the oil of the three axis, and the screw part and the butter; If working environment temperature is too low in winter screw, polished rod ( Square guide or circular guide) First part should use gasoline to wash clean, then add oil, otherwise it will cause machine transmission part of the resistance is too large and cause dislocation. When we do these maintenance work, the security is very important, must cut off power supply, to monitor display and main circuit power light goes out after may. Have professional staff to maintain better, have no best or consulting professionals familiar with all kinds of parts, not free disassembly, causes the damage of high speed engraving and milling machine.