The safety of the laser cutting machine electricity operation

Laser cutting machine electricity is operation can be a comprehensive electricity, each part can also be carried out on the part of the artifacts electricity, then the total power supply test. Power to this approach is safe, but a long duration, check if the alarm after electricity failure, then the parts were launched in manual mode. Before starting check safety device for effect, whether can work normally, can achieve the rated working index, in short, must according to the instruction manual of machine tool an important part of a cursory examination machine work and the function is normal, is complete, make each link of the machine tool can operation movement.
then is to adjust the level of the nc machine tool, coarse geometric accuracy of machine tool, to adjust the assembly parts and relative location of the host, with quick dry cement perfusion host and attachments of the anchor bolt, flat, each hole up such as cement dry completely. When the polarization test, to ensure that the numerical control system is confirmed, without any warning, ready to emergency button to cut off the power supply.
check during operation running situation of each axis, laser cutting machine tool should be continuous feed to each axis, through the digital display shows the numerical check machine components moving direction is correct or not. And then check the shaft is moving distance and moving instruction, if the do not conform to the parameters to timely feedback.
you can also use the manual into each axis to low-speed moving, and make them have met overtravel switch, this is to check whether the ultra form a powerful, alarms when nc system is in the distance. After when you need to do a return reference point. The benchmark for the CNC cutting machine is the benchmark for future machine tool processing program, so you must check the presence of benchmark functions and the position of the each return reference point is consistent or not.