The operation of the laser cutting machine

40 hours per operation or maintenance, each work 1000 hours a week or maintenance every six months, to be carried out in accordance with the designation and application.

laser cutting machine according to the defined in good labor protection articles, around the laser beam must wear the safety glasses conforms to the defined.
use cylinders, should avoid to crush the welding wire, so as to avoid leakage accidents. And controlled by computer, through the pulse laser discharge, thus the output controlled repeated high frequency pulse laser, the formation of a certain frequency, pulse width of the beam, the pulse laser beam through the light path transmission and reflection and through the focusing lens group focused on the machining surface, forming a subtle, high energy density, intensity, focal spot around the stay processing surface, with instantaneous high temperature melting or gasification materials processed. In strict accordance with the laser launcher to start the laser.
laser cutting machine is working, pay attention to observe machine operation, in order to avoid cutting machine out of the valid range or two collision accident. The use of gas cylinders, transportation shall comply with the rules of the cylinder.
the manipulation when the equipment is staff shall not leave the job or client stay tube, such as really need to leave should be shut down or block the power switch.
the new workpiece after the input process, should first test run, and check the running status.
will fire extinguisher in a readily accessible place; When not in processing to switch off the laser or light brake; Don't placed around without protective laser paper, cloth or other combustible materials.
boot should be manually after low-speed X and Y direction thought bed, check with or without abnormal situation. Laser cutting machine at work, if it is dangerous to malfunction, novice required by professional staff training to the independent manipulation, according to the experience summed up the laser cutting machine safety work 13 details, I hope to help, as follows:
observe general cutting machine safety control procedures.
to abide by high pressure safety procedures for servicing. Each the object surface in an instant, a high-energy pulse of laser sputtering out a tiny hole, under computer control, laser head and processed materials according to the continuous dot relative motion paint with good graphics in advance, and will combine processing ChengXiang to the shape of the object. Ban cylinder blasting bask in the sun or away from heat.
laser cutting is the application of high power density after focusing the laser energy.
operator must through the training, equipment structure, function, the master control system related knowledge.
keep laser, bed, and nearby site neat, orderly and no pollution, artifacts, plank, waste according to delimit the stack.
in not ascertain whether a particular material can use laser light or heat, not to its processing, lest produce smoke and steam latent danger. When you start the cylinder valves, the operator must stand in the bottle mouth side.
laser cutting machine in the machining process of abnormal, it is necessary to stop the machine immediately and timely troubleshooting or report to the competent staff. 。