Handheld Fiber Laser Cleaning Machine Portable Rust Laser Clean Machine Metal Surface Rust Paint Cleaner
Enclosed Type
The analysis of the causes of laser cutting machine for cutting the dislocation
by：Transon
2020-11-01
Laser cutting machine for cutting the dislocation is why (
1)
Feeding shaft step distance problem.
Cloth from = the measured length * original interval/it's length.
（
2)
Feeding shaft of the synchronous belt fasten the wheel in motor synchronous belt wheel is loose.
（
3)
Roll loose network, to that of the relative slip between feeding shaft.
（
4)
Processing speed setting is too large.
（
5)
Cart motor line contact undesirable.
（
6)
The drive current is too small.
（
7)
Drive a broken or motor is broken.
General motors less bad phenomenon.
Custom message
Do not allow empty
Do not allow emptyPlease enter a valid e-mail format
Do not allow empty
Related Products
