Enclosed Type

Processing the pressure bars of wooden door

by：Transon 2020-07-26

This wooden door pressure bars processing diagram because of a lot of solid wood composite door pressure bars for circular or alien, has certain difficulty in processing, and waste material. If the CNC engraving machine processing method that can use suit cut crossed, first by CAD diagram programming after import to size, and then carry on the processing, save material and is convenient and feasible. When processing pressure bars because the workpiece clamping generally in the edge position, so attention should be paid to measure and calculate fixture installation location is on the path of the tool running. If on the tool path is likely to see tooling and fixture collision, lead to a preset offset in the origin of components, the path wandering, processing the waste; Cutting tool and fixture collision not only can make the machining errors, and may damage the tool and machine tool, affect the machining accuracy of machine tools; In addition, the fixture fixed each processing part of the center panel is very hard, when processing is complete because of less parts connected to the panel, has not been effective clamping and cutting tools of high speed and result in artifacts collapse, more dangerous and prone to collapse stubble. So before processing to pay attention to a certain amount of machining allowance in the thickness direction, ensure the machining parts connected to the panel is more, to prevent the occurrence of the above situation. Wooden door pressure bars processing sketch see figure above.

Custom message