Laser engraving machine laser light to do - - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine carving factory house

CNC machinery equipment co. , LTD. , integrating research, development, manufacture various types of woodworking advertising engraving machine | jade stone carving machine | | metal mold engraving machine series of optical fiber laser five-axis robot | | styrofoam CNC mortise and tenon joint processing center | custom home line, all kinds of CNC engraving machine series, just take a look at below small make up of foam carving machine noise anomalies related information, hope to be of service, welcome to inquire!

carving machine has been widely used now, no matter how good engraving machine in use after a period of time, will appear some problems, big or small it is, for example, laser engraving machine, if the laser engraving machine laser light how to deal with:




click to view more engraving machine products

a test, observe the ammeter state
press operation panel test, observe the current state, is two kinds of results ( 1) There is current, it will check whether the lens is broken, whether the light path deviation is serious. ( 2) There is no current, check whether the laser power supply is switched on, whether the high tension line is loose. Loose fall off, whether the signal lines.

2 water loop system whether normal
check whether the water loop system is normal, ( 1) The check inlet and outlet water, for, or have pipes burst. ( 2) No water, see if electricity, or water pump have any damage. Can some

3, self-check, send data not luminous
check computer Settings are correct.

as long as it is in the process of using laser engraving machine, laser head if no light, can rule out once, so it is good to solve the problem! Click to view more consultation!