Laser cutting method to determine the cutting edge

Laser cutting method to determine the cutting edge features: cutting completely adapt to the complex changes of the product, covering parts completely simulate the actual mold production situation, does not need manual correction, speed, short cycle and good cutting quality. Laser cutting to cut the program no longer leave the manual correction, but is consistent with theoretical cutting edge 3 d processing procedures, directly used for cutting products. It can ensure the cutting process is consistent with the actual state of trimming, no row less than given by two-dimensional line. The whole cutting process without manual intervention, each time from the source to ensure the processing of products are consistent with d/a, which will need to grope for several times to get original cutting edge was reduced to only need three to four times can be completed. For metal processing, line cutting has a higher accuracy, and to cut thick plate, but its weakness is very slow, sometimes need to use other methods and perforation, wear silk can be cut, and cutting size also is very limited, can laser cutting on the material punching, cutting, cutting speed, processing is much bigger than the cutting size range. Laser cutting has been widely used in metal processing industry, laser cutting speed, high precision. Of the thin plate, aluminum plate, stainless steel and other metal sheet cutting has absolute advantage, this also is the cause of the laser cutting can not be replaced, believe that as people demand for laser cutting products increasing, the popularity of laser cutting will be more. Laser cutting and other cutting is there are many different in approach, cutting for some metal parts we can adopt method of punching and shearing process, high efficiency, high speed already so, but also low cost but need specific mould and cutting tools for cutting and only in a sheet of salt, shear processing, laser cutting machine, laser cutting and the cutting method compared with flexibility is good, may at any time for any shape workpiece cutting processing and don't have to die a little. Punching and shearing process will be difficult or impossible so there is no widely used. Flame cutting is one of the metals commonly used cutting process, the thickness of the cutting range is very large, but compared with laser cutting, cutting precision and surface quality is relatively poor, but to plate and processing range is bigger than laser cutting, reason for laser cutting is delicate and commonly adopted.