Portable Laser Welding Machine For Lithium Battery Raycus 1500W Spot Laser Welder
Enclosed Type
Laser cutting machine return program beginning failure solution is as follows
by：Transon
2020-10-30
Laser cutting machine return program starting point fault solution is as follows: 1, the first operating laser cutting machine, make the longitudinal slide slowly contact measuring rod, and compression spring to produce deformation, appropriate at this time will dial indicator headers to buy '0';
2, then use the same method to make the other a dial indicator to zero device header is set to '0'.
Regardless of cutting machine now shows how much is the X, Y coordinates, according to the Z key to make it all return to zero, this position is for cutting machine set to zero.
3, then according to the position of the steel plate cutting machine operation to set program starting point (
The origin or the steel plate)
Remember after, set at this time of the X, Y coordinates, the coordinates is cutting machine zero point and starting point (
Or steel plate at the origin)
The relative position.
4, after the failure troubleshooting first, after waiting for cutting machine back to normal to zero, the above mentioned methods and reuse remember coordinates can be found the beginning of the program (
The origin or the steel plate)
。
5, so it can be cut, the smooth implementation of resuming until the entire steel plate cutting.
Custom message
Related Products
