Enclosed Type

Laser cutting machine replacement with water tank water clean

by：Transon 2020-10-27

Laser cutting machine water replacement and tank cleaning ( Suggestion: clean water tank and replace circulating water once a week) Note: the machine work before must ensure that the laser tube is full of circulating water. Circulating water quality and water temperature this is directly influence the service life of laser tube, it is recommended to use pure water, and to control the water temperature below 35 ℃. For more than 35 ℃ to replace the circulating water, or to add ice to reduce the water temperature, water, Advice the user to select the cooling machine, or use two tank) 。 Clean water tank: first, turn the power off and remove water inlet pipe, let the laser tube of water into the tank automatically, open the water tank, pump and clear the dirt on the water pump. Good clean water tank clean, replace the circulating water, the water pump to restore back into the water tank, the connection pipe inserted into the inlet of the pump, tidy up the joint. 2 - the pump power alone, and running 3 minutes ( The laser tube is full of circulating water) 。

Custom message