Ruida 6445G 30W RF Metal Tube DC24V CO2 Laser Cutting Engraving Machine 900MM*600MM Cutting Area 6090
Enclosed Type
Laser cutting machine laser tube break, crack, the reason of the water head loss
by：Transon
2020-10-30
Control the water temperature is 25 ℃ -
Scope of 30 ℃, cooling water shall not be frozen cold regions, especially the laser after downtime, must not let water stored in the laser tube.
Light is under the control of the water conservation work;
（
Will test the light on and off with water or not blinking)
The phenomenon of water pipes have play down.
The laser tube will have bubbles.
Water flow is normal;
In the direction of flow is higher than that of low into.
6. 1 - 5 normal word that is the laser tube itself quality problems
6. 1 - 5 normal word that is the laser tube itself quality problems
Custom message
Related Products
