3W 5W Portable UV Laser Marking/engraving Machine/equipment Price
Enclosed Type
Laser cutting machine laser level adjustment
by：Transon
2020-10-28
Laser cutting machine laser level after adjusting with the adjust on the host level, place the stable laser on the chassis of the laser, began to adjust the laser and light the way.
1)
Adjust the adjustment screw on either side of the chassis, the laser in the middle of the chassis.
2)
With frame type or a type level inside the laser plate, adjust slightly at the beginning of laser level;
3)
Adjust the laser the screws on the legs, laser may be jacked up a certain height, then to add gaskets, only when the light path adjustment right, locking laser again.
4)
Half fine adjustment (
The following for online after the normal operation of the machine tool)
5)
First inside the reflecting mirror seat in a dimmer with spider silk, and observe laser out of shape and the location of the red light beam to the fork after the silk, to accurately adjust the laser several times, until the red light in the center of the spider silk.
6)
Fine adjustment to adjust the laser power output from around 50 w and 100 w, will be a cardboard fixed on the spider silk, let the laser burn out in scraps of paper burn mark and observe laser injection shape and the location of the fork after silk.
Burn marks symmetry can be adjusted repeatedly until at four o 'clock.
Custom message
Related Products
