Handheld Fiber Laser Cleaning Machine Portable Rust Laser Clean Machine Metal Surface Rust Paint Cleaner
Enclosed Type
Laser cutting machine focus component method
by：Transon
2020-10-29
Loading method of focusing laser cutting machine components
1, focus on loose from the laser cutting torque component.
2, remove focus lens focus from artifacts, and analysis of pure acetone cleaning just remove the lens.
3, will focus on the lens in focus artifacts, will focus on components in laser cutting major again, and locking fixation.
4, mount nozzle opening indicator light, adjust focus component the regulating screw, the indicator light is basically from the injection nozzle center.
5, the nozzle to a small piece of scotch tape, adjust the laser power, points out laser, remove the transparent tape observation tape on the two round concentricity, adjustment focus on components of the adjustment screw until two concentric circle.
6, fine-tuning of coke, make the nozzle transparent tape center appears clear and small dots.
7, cutting head calibration, press F3, select tools menu bar MACRO/capacitive head calibration ( M30HC1) / START, try using plate cutting, until the desired cutting quality.
1, focus on loose from the laser cutting torque component.
2, remove focus lens focus from artifacts, and analysis of pure acetone cleaning just remove the lens.
3, will focus on the lens in focus artifacts, will focus on components in laser cutting major again, and locking fixation.
4, mount nozzle opening indicator light, adjust focus component the regulating screw, the indicator light is basically from the injection nozzle center.
5, the nozzle to a small piece of scotch tape, adjust the laser power, points out laser, remove the transparent tape observation tape on the two round concentricity, adjustment focus on components of the adjustment screw until two concentric circle.
6, fine-tuning of coke, make the nozzle transparent tape center appears clear and small dots.
7, cutting head calibration, press F3, select tools menu bar MACRO/capacitive head calibration ( M30HC1) / START, try using plate cutting, until the desired cutting quality.
Custom message
Related Products
