Jinan stone engraving machine, engraving machine, carving factory - home Jinan CNC equipment co. , LTD

Tombstone carving machine carved in use process will appear in some places the phenomenon of less than, how be to return a responsibility? Stone carving machine factory front desk surface is done with cutter milling flat, so there is no mesa rugged phenomenon. But we are used to process the stone must be error, when we are in the material left on, may be this is the material of high or low, will appear in the actual sculpture carving two-tone.


in order to avoid the situation requires a two-tone carving started carving on the origin of the x, y axis and Z axis to separately. XY material left corner position, again the Z axis moves to material located in the middle. If the material is too big, when the carving should be divided into 3 three, respectively, of the origin. Carving mat under the material when something, try to make the material level.

stone engraving machine processing precision is how to guarantee? Stone carving machine is of high precision depends on the precision of the machine tool itself, to ensure that the tombstone carving machine including geometric accuracy and precision of cutting precision. Tombstone carving machine, on the other hand, the stand or fall of various performance and tombstone carving machine can normal function will directly affect the normal use of tombstone carving machine. Therefore, stone engraving machine precision and performance test of the initial use of tombstone carving machine and machine tool maintenance adjusted technical indexes of recovery is very important.








stone carving machine at the time of processing relief to need what tools? Stone carving machine tool how to choose? Today let's say the flat-bottomed cutter: & # 39;




flat cutter is also called flat kedao, commonly used in fine anaglyph carved stone carving machine small wide. This type of cutting tool in carving industry wide scope of application, the decision is the characteristic of engraving industry. Carving industry is given priority to with fine processing, which requires more small tool has a set of strength at the same time. ZhuiDao just to meet the needs of the carving industry. ZhuiDao bottom edge, commonly known as blade, knife, it is similar to the column can be used in faceted light. ZhuiDao side blade tilted a certain Angle, formed in the process of carving sloping sides. ZhuiDao geometric characteristics of the decision it can in order to realize the unique three-dimensional carving industry Angle effect. ZhuiDao is mainly used for single wire sculpture, regional coarse sculpture, fine carving, three-dimensional Angle and projection, image grey carving carving, etc. Flat cutter after relief sculpture in order to show the color and need to deal with the old, the feeling of restoring ancient ways so do old processing?



in the art of stone carving machine to make to relief is to manifest the value of art, not only embodies in the fine texture and exquisite carving samples, etc. , its color and old approach is also very important.
stone carving machine to do the old way:
1, the sample will be carved roast hot, reoccupy alum water loess daub on it, after working as unearthed cultural relics;
2, art stone relief of a little alum boiled with water for several days, and then remove the stone, dry after a rust colour; With vines and alum boiled for several days, the effect is also same as rust; Wash clean with clear water will float on the surface of color, and then with a little yellow mud brush again, also can achieve the result of antique works. But in carved stone carving machine is not everything, after the good sample after artificial processing effect will be more good.