The safety of the laser cutting machine

Cutting material. Although fiber laser cutting edge cutting big local materials, but it cannot be used for cutting class acrylic or polycarbonate material, and can only be cut wood or fiber material in the field of limited use. Synchronization, for sure when to use optical fiber laser cutting, to cut the thickness of the material is a very main factor. Thicker material demand more power cut, and these conditions, laser cutting may not is also a good choose. Application at this time to just install the optical fiber laser in plasma cutting head next to the function. Before the news fast, convenient switch to the plasma cutting, operators can use fiber laser cutting requirements tolerance small thin materials. Even to be able to utilize the two kinds of different cutting step cutting the same parts. For example, the operator can choose the use of plasma cutting parts outside, after using the optical fiber laser cutting internal shape.
in good condition will be set up to evaluate the integrated laser cutting demand for components and how to buy the parts also weighed in. Equipped with a laser power supply, gas, work station, laser cutting head and highly manipulator, nc ( CNC) Cutting control system to implement the integration of the application and processing efficiency of the precious. With comprehensive treatment scheme, the purchase and the order of the integrated optical fiber laser system becomes not so complicated. Weigh out already make sure the cutting parameters, optimization are applied to the system of cutting, to begin immediately after cutting power supply is connected.
eye. Fiber laser cutting machine system light wavelength is harmful to the eyes, but needed to take the measures that shield an eye. Because the technology present only less than five years, however, strongly suggested to carry out the proper and safe operation of the system and the comprehensive training. Many operators have no use of optical fiber laser cutting cutting experience, however, should be undertaken by optical fiber cutting system operation good initial training to compensate for the lack of experience.