Enclosed Type

The power of the laser cutting machine to check

by：Transon 2020-10-28

Laser cutting machine power check, main is to observe compensation transformer and the regulating transformer temperature rise is normal, if there is any overheating and coil discoloration phenomenon to appear. Carbon brush contact is normal, monitor the output and input voltage have overload phenomenon, etc. Still need to check whether the electric contact is damaged, whether you need replacement and repair, check whether the column type regulating transformer movement process is flexible, carbon brush is in good condition, in a timely manner to replace the damaged the carbon brush. Such as burns and carbon brush powder appeared on the coil, will need to use the fine burning on grinding and remove dust in a timely manner. Once every three months will need to remove regulator parts of dust and dirt, and check whether the chain transmission system work normally, for sprocket, adjust tightness of the chain, to check whether there is tilted carbon brush holder, stuck phenomenon, if found should be adjusted.

Custom message