Enclosed Type

The maintenance of the laser cutting writers aging

by：Transon 2020-10-30

The maintenance of the laser cutting writers aging. Laser cutting machine will be the problem of aging after use, including optical fiber laser cutting machine laser is easy ageing, therefore in the usual used to be very pay attention to the maintenance of the machine. Normal maintenance of the machine are: 1, once a week for the vacuum suction off the dust and dirt inside the laser cutting machine, all electrical cabinets should be protected from dust. 2, the guide should often clean, remove dust and other sundry, ensure the normal operation of the optical fiber laser cutting machine, rack to wipe, often add lubricating oil, ensure lubricating and no clutter. Guide to regular cleaning and lubricating oil, and the motor is always clean and grease, machine in March will be better and more accurate cutting, cutting out the product quality will be improved. 3, check the steel belt of the optical fiber laser cutting machine, must guarantee the taut. Otherwise in run out of the question, probably will hurt people, serious still can cause casualties. Steel with seemingly little things, out of the question is a bit serious. 4, check every six months rail straightness and verticality of the machine, found abnormal timely maintenance and debugging. Otherwise how could cut out effect is not good, error will increase, affect the cutting quality.

Custom message