Enclosed Type

The correct way of using the small cutting machine

by：Transon 2020-10-30

Small cutting machine bending sheet metal should be in the middle of the machine, bending machine should not be commonly slant, lest affect bending effect and precision of machine tools, such as some of the artifacts is really necessary, unilateral process load shall not be greater than the nominal pressure of a quarter, and required both sides folded plate at the same time, in order to avoid unilateral loading machine. By bending sheet thickness at the beginning of the upper and lower die clearance, its clearance than big thickness 1 mm or so, so not crush mold because of the gap is too small. Artifacts are not allowed to be greater than the nominal bending force. To make the mould durable, don't cry because it came to bending sheet length is shorter, the system pressure and damage, especially short bending sheet metal, small cutting machine working pressure should be properly reduced, to ensure the workpiece length per 100 mm bending force does not exceed 100 kn. 。 15 - normal working oil temperature 60 ℃, and clean the oil suction mouth mesh type oil filter, keep clear of oil absorption, otherwise the pump will absorb air, make the small cutting machine produces vibration and noise. Laser oil tank within N46, bending machine for the first time use must be through the filter replacement after a month, no more than one year after the replacement.

what are the cooling system of laser cutting machine?

Custom message