Double Heads TS1610 CO2 Laser Fabric Acrylic Textile Cutting Engraving Machine For Industry
Enclosed Type
The consequences of laser cutting machine to incorrect feeding speed
by：Transon
2020-10-28
Laser cutting machine cutting, to choose suitable feed speed, otherwise it may cause some bad cutting results.
feed speed is too fast will cause:
( 1) Can't cutting, spark.
（ 2) Some areas can be cut off, but some area cannot be cut off.
（ 3) Cut surface present article diagonal lines, and lower melt stains.
（ 4) Thicker, but without melting stains caused the entire section.
feed speed too slow will cause:
( 1) Cause a molten state, cut surface is rough.
（ 2) Cutting seam width, the melt in the region sharp corners.
（ 3) Affect the cutting efficiency.
feed speed is too fast will cause:
( 1) Can't cutting, spark.
（ 2) Some areas can be cut off, but some area cannot be cut off.
（ 3) Cut surface present article diagonal lines, and lower melt stains.
（ 4) Thicker, but without melting stains caused the entire section.
feed speed too slow will cause:
( 1) Cause a molten state, cut surface is rough.
（ 2) Cutting seam width, the melt in the region sharp corners.
（ 3) Affect the cutting efficiency.
Custom message
Related Products
