Reason for the wood carving machine spindle problems and daily maintenance - - 【 】 Engraving machine _ _ _ _ CNC woodworking engraving machine engraving machine engraving machine

we today, we give a analysis of engraving machine spindle some common problems and provides some solutions for friends reference.





1, carving machine spindle electric strength, turn motionless: the solution: check circuit, check whether the motor line is lack of phase, or whether the cable short circuit;


2, carving machine spindle hot: the solution: first check whether the water pump is working, and depends on whether the circulating water lower level;


3, carving machine spindle inversion: the solution: check whether the motor line phase directly or will output the sale side switch;


4, carving machine spindle strange sounds: the solution: check whether the motor overload operation; Within the fault may be motor, should be timely repairs or replacement.





whether woodworking engraving machine spindle or other failure, will be made according to the concrete reason analysis and solve, so as to better solve the problem, make the equipment to normal operation as soon as possible. But for some removal equipment accessories, must be careful, as far as possible to communicate and discuss with manufacturer, then the corresponding solution.






wood carving of maintenance cycle and details:





more than woodworking engraving machine spindle are introduced the problems and solutions, we just need to know in the everyday use below maintenance use common sense, to avoid some unnecessary problems. Woodworking engraving machine in the process of daily use, it is easy to produce some debris, we want to clear in time, so that we can guarantee the use of equipment performance. In addition, CNC engraving machine other parts also need to often check, to this, we give a woodworking engraving machine parts inspection and maintenance schedule, customers can consult.





1, the content of the need to check every day to:


a, water-cooled spindle of water tank, whether to need to change, whether the water circulation is smooth;


b, the dust on the dust mask to clear in time, keep moving smoothly in the process of processing;


c, check each part of the cable is loose, such as carving spindle on the aviation plug is loose, etc. ;


d, distribution cabinets, control box and so on there is fan, check whether the wind speed is normal;


e, carving machine is used to clear in time, don't leave dust and debris, etc. ;





2, and the content of the inspection at least once a week for:


X, Y axis screw and guide rail to clear in time, and timely, ensure the lubrication degree, reduce wear;





3, check the content of at least a month to:


the machine maintenance and maintenance work, every month need to clean up and check it again;





4, not regular inspection content is:


fittings such as leadscrew nut, slider need not regular check, ensure no loose or wear the emergence of the phenomenon such as computer antivirus in time, ensure that no virus damage control system, thus affecting processing, etc.





the premise that ensure the normal use of woodworking engraving machine spindle:





1, choose good CNC equipment manufacturers, because a few small manufacturers in order to save the production cost, tend to choose some poor quality of the main shaft, the inferior quality, quality, and the inside of the spindle bearing is very easy to damage, in the process of carving machining high speed, it is easy to damage and problems occurred.





2, carving institution building design is reasonable, reasonable design will take into account the water-cooled spindle of water cycle system, the reasonable circulation system can improve the effect of water cooling, better to avoid the spindle temperature is too high, causes the damage of bearing.





3, CNC engraving machine, as a new operation best after a professional system training, has a standard operating methods and ways, operating equipment. For beginners in the use of engraving machine, often in the spindle had not reached the speed, is eager to knife carving process, such not only easy to cutting knife, more easy to damage the spindle bearings.





4, daily maintenance and maintenance must be according to the requirement to do. As timely replacement of water circulation cooling water, avoid sawdust impurities into the cooling water, such as spindle water cycle of the congestion problem.