How to use a laser marking machine to mark/engrave colors on ceramics
Enclosed Type
Laser cutting machine samples appear the cause of the burr
by：Transon
2020-10-31
Laser cutting machine samples are the reasons for burr 1.
Laser focus position error up and down.
2.
The laser output power is too small.
3.
Cutting speed too slow.
4.
Cutting gas purity is not enough.
5.
Laser focus shifts.
6.
The instability of machine running time is too long there.
Custom message
Do not allow empty
Do not allow emptyPlease enter a valid e-mail format
Do not allow empty
Related Products
