ATC Wood Cnc Router 1325 Atc Cnc Engraving Machine atc cnc carving machine for wood
Enclosed Type
Laser cutting machine replacing optical lens
by：Transon
2020-10-28
Notice: when the laser cutter replacement lenses out from inside the box be very careful to prevent lens when the lens that touch an injury;
Before packing not open, not to put any pressure on lens;
Take out from inside the box reflection lens and focus lens, should wear clean gloves, picking it from the side of the lens;
When take off the lens on the packaging, should avoid the content such as dust fall on the lens;
After remove the lens, spray gun to remove the dust on the mirror, and then put the lens on the lens paper, clear lens bracket and fixed frame of the dust and dirt, avoid by all means when other foreign bodies in the lenses, installing a lens on the lens holder, don't too hard, in order to avoid the lens distortion, lens assembly is completed, with a clean air spray gun to clear the dust on the lens and foreign bodies.
Custom message
Related Products
